Trailer Leg Assembly

Parts Required

x4 2.6x8mm Truss Screws

x1 3D Printed Upper Trailer Leg Pivot

x1 3D Printed Middle Trailer Leg Pivot

x1 3D Printed Trailer Leg

STEPS

1.) Secure the upper trailer leg pivot to the front frame using a 2.6x8mm Truss Screw.

2.) Secure the trailer leg to the front frame using a 2.6x8mm Truss Screw.

3.) Connect the upper trailer leg pivot and trailer leg together with the middle trailer leg pivot and 2 2.6x8mm Truss Screws.

Make sure each joint is able to pivot freely. The trailer leg should be able to swing all the way down just using gravity when the upper trailer leg pivot is released.