First Power Up

Parts Required

1. 2x 16340 Batteries

STEPS

1. Double check all of your connections.
2. Make sure the power switch is moved to the outside position.
3. Insert both 16340 batteries in accordance to the labels on the battery holders "Meaning positive to the positive side of the holder e.t.c."
4. Power ON the MiniSkidi, you should hear the servo's initiate to their startup position
5. Connect to the MiniSkidi using a phone, tablet, laptop etc.. follow the steps below for a phone or refer to the "Different connection method's" module.
6. With the controller interface displayed verify that the MiniSkidi moves forward, side to side, and backward when the corresponding button is pressed. If one or both of the motors are reversed simply power down and flip the wire connections for the terminal block of the affected motor.
7. Repeat the previous step for the arm motor.