Wiring Cab Lights

STEPS



  1. Using a pair of wire cutters trim the wires so that they hang just past the bottom of the cab or 4.5cm.
  2. Using a pair of wire stripper strip the end of each wire back 1cm
  3. Intertwine the two yellow wires together then the white wires together.
  4. Place the combined yellow wire ends into the inner position on the "AUX" terminal block.
  5. Place the combined white wire ends into the outer position.
  6. Power ON the MiniSkidi and verify that the lights turn ON/OFF when the light button is pressed.